 |
STIFFENED CLEATS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The addition of stiffeners significantly improves the load carrying capacity of all forms of cleats. (Refer to the Load data section on the Introduction page for full details). Where situations demand stiffened versions of all types of both Bolt on and Weld-on cleats are available to suit all section sizes subject to a maximum overall length of 450mm. The addition of stiffening ribs is particularly relevant where cleats are extended due to the rapid reduction in capacity as length increases. Apart from the added stiffening rib these cleats are dimensionally identical to their standard counterparts and fit as indicated by the diagrams in the “General Information” section of the Introduction page. They can be used with purlins, rails and Cee sections and product codes for most available options are listed on this page; refer to the “Unprimed Cleats” section if looking for information on stiffened unprimed bolt-on cleats or stiffened and extended unprimed bolt-on cleats. Dimensioned drawings of typical examples in both bolt-on and weld-on formats are included on this page along with full scale CAD drawings in similar style.
The diagram below shows typical examples of stiffened versions of bolt on and weld on cleats. It must be noted that the maximum available extension for manufacturing purposes is governed by the 450 maximum overall height. Note also the harness hole is located in the stiffener. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stiffened cleats in Weld-on format are supplied without any primer or other form of corrosion protection while bolt-on versions are supplied primed unless otherwise requested. Stiffened cleats are made to order and extended lead times apply. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Load Data: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ProSigma+ Stiffened Cleat product codes and drawings: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Brochures | Recruitment | Disclaimer | Orderforms | |  |
 |
|
| DUGGAN PROFILES & STEEL SERVICE CENTRE Ltd. |
Duggan Profiles & Steel Service Centre Ltd. Dublin Road, Kilkenny - Ireland Tel.: +353-56-7722485 - Fax: +353-56-7763411 E-mail: salesdp@steel.ie © Copyright Duggan Steel Group Ltd. 2011 webmaster@steel.ie Last update: 15 December, 2011 |
 |
   |
|