technical support

Further assistance may be obtained by contacting Duggan Profiles on +353-56-7722485
ProSigma+ EAVES STRUT CLEAT
Eaves Beam Eaves Strut Eaves Beam
3D PDF
General Information

Eaves Strut Cleats are an Eaves Beam anti sag component used in conjunction with Eaves Struts and Eaves Strut to Purlin Cleats to provide anti sag support to Eaves Beams at various points along the span. A drawing of this component is shown below.
Eaves Strut cleats diagram
There is a version of this cleat for each section depth of Eaves Beam and it may be supplied to match either galvanised or prepainted steel. For information on the application of this component please refer to the section Eaves Beam Anti Sag.
How to order

The product codes along with a drawing and CAD file are included in the table below. The code and quantity required are needed when ordering.
ProSigma+ Eaves Strut Cleat product codes and drawings:
Code: Description: DXF File PDF File
DP-EBS-CLEAT180 Eaves Strut Cleat to suit 180 Eaves Beam: AutoCad File PDF File
DP-EBS-CLEAT210 Eaves Strut Cleat to suit 210 Eaves Beam: AutoCad File
DP-PEBS-CLEAT180 Eaves Strut Cleat to suit 180 Eaves Beam (Prepainted): AutoCad File
DP-PEBS-CLEAT210 Eaves Strut Cleat to suit 210 Eaves Beam (Prepainted): AutoCad File
Click on the DXF or PDF icons above to download the CAD (.dxf) or .pdf file.

Trouble downloading?
Right-Click on the DXF icon: this will bring up a menu where you can click on either
'Save Target As' or 'Save Link As'.
Then, after saving the DXF file to your computer you can run your CAD software
and open the DXF file that you saved.