DUGGAN PROFILES &
STEEL SERVICE CENTRE Ltd.
| | Brochures | Recruitment | Disclaimer | | |
|
|
DUGGAN PROFILES & |
|
 |
||||||||||||
| 800/66 Prodeck Roof Decking Load Table | ||||||||||||
 |
||||||||||||
| 66mm Deep Profile 800mm Cover Width (Material Spec.: Fe E 280 G) |
Applied Load in kN/m2 | |||||||||||
| Span in Metres | ||||||||||||
| Section Type | Thick mm | Load Type | 1.8 | 2.0 | 2.2 | 2.4 | 2.6 | 2.8 | 3.0 | 3.2 | 3.4 | 3.6 |
| Single | 0.70 | Dead + Super | 7.69 | 5.59 | 4.18 | 3.20 | 2.50 | 1.98 | 1.60 | 1.30 | 1.07 | 0.89 |
| Wind Suction | 9.74 | 7.12 | 5.37 | 4.16 | 3.29 | 2.65 | 2.17 | 1.80 | 1.52 | 1.29 | ||
| 0.75 | Dead + Super | 8.23 | 5.98 | 4.47 | 3.42 | 2.68 | 2.13 | 1.71 | 1.40 | 1.15 | 0.96 | |
| Wind Suction | 10.46 | 7.65 | 5.76 | 4.46 | 3.52 | 2.84 | 2.32 | 1.93 | 1.62 | 1.38 | ||
| 0.90 | Dead + Super | 10.17 | 7.39 | 5.52 | 4.23 | 3.30 | 2.62 | 2.11 | 1.72 | 1.42 | 1.18 | |
| Wind Suction | 12.74 | 9.32 | 7.03 | 5.44 | 4.30 | 3.46 | 2.84 | 2.35 | 1.98 | 1.69 | ||
| 1.20 | Dead + Super | 13.78 | 10.01 | 7.48 | 5.73 | 4.48 | 3.56 | 2.87 | 2.34 | 1.92 | 1.60 | |
| Wind Suction | 17.26 | 12.62 | 9.52 | 7.36 | 5.82 | 4.69 | 3.84 | 3.19 | 2.68 | 2.28 | ||
| Double | 0.70 | Dead + Super | 8.48 | 6.86 | 5.65 | 4.74 | 4.02 | 3.36 | 2.72 | 2.22 | 1.84 | 1.54 |
| Wind Suction | 9.84 | 7.99 | 6.61 | 5.57 | 4.76 | 4.11 | 3.56 | 2.95 | 2.47 | 2.09 | ||
| 0.75 | Dead + Super | 9.17 | 7.41 | 6.11 | 5.12 | 4.35 | 3.60 | 2.91 | 2.39 | 1.97 | 1.65 | |
| Wind Suction | 10.57 | 8.58 | 7.10 | 5.98 | 5.11 | 4.42 | 3.82 | 3.16 | 2.65 | 2.24 | ||
| 0.90 | Dead + Super | 11.29 | 9.12 | 7.52 | 6.30 | 5.35 | 4.45 | 3.59 | 2.94 | 2.44 | 2.04 | |
| Wind Suction | 12.89 | 10.46 | 8.67 | 7.30 | 6.24 | 5.39 | 4.65 | 3.85 | 3.23 | 2.74 | ||
| 1.20 | Dead + Super | 15.36 | 12.41 | 10.23 | 8.58 | 7.29 | 6.02 | 4.87 | 3.99 | 3.30 | 2.76 | |
| Wind Suction | 17.39 | 14.12 | 11.69 | 9.85 | 8.41 | 7.27 | 6.30 | 5.22 | 4.38 | 3.71 | ||
| Multiple | 0.70 | Dead + Super | 10.59 | 8.56 | 7.02 | 5.39 | 4.22 | 3.36 | 2.72 | 2.22 | 1.84 | 1.54 |
| Wind Suction | 12.32 | 9.99 | 8.27 | 6.87 | 5.42 | 4.36 | 3.56 | 2.95 | 2.47 | 2.09 | ||
| 0.75 | Dead + Super | 11.39 | 9.21 | 7.51 | 5.77 | 4.52 | 3.60 | 2.91 | 2.39 | 1.97 | 1.65 | |
| Wind Suction | 13.31 | 10.79 | 8.94 | 7.38 | 5.82 | 4.68 | 3.82 | 3.16 | 2.65 | 2.24 | ||
| 0.90 | Dead + Super | 13.88 | 11.22 | 9.26 | 7.12 | 5.58 | 4.45 | 3.59 | 2.94 | 2.44 | 2.04 | |
| Wind Suction | 16.38 | 13.29 | 11.00 | 8.99 | 7.09 | 5.70 | 4.65 | 3.85 | 3.23 | 2.74 | ||
| 1.20 | Dead + Super | 18.81 | 15.21 | 12.54 | 9.65 | 7.56 | 6.02 | 4.87 | 3.99 | 3.30 | 2.76 | |
| Wind Suction | 22.28 | 18.07 | 14.96 | 12.18 | 9.61 | 7.72 | 6.30 | 5.22 | 4.38 | 3.71 | ||
| Deflection: Dead + Super = L/250 Deflection: Wind Suction Loads + L/200 Note: All intermediate values within the limits of the table may be obtained by linear interpolation. |
||||||||||||
Figures and Comments given here are given for guidance purposes only. While care has been taken to ensure accuracy Duggan Profiles & Steel Service Centre Ltd. and its related companies do not accept liability for errors / or omissions. Customers should satisfy themselves of the suitability of the products supplied or manufactured by Duggan Profiles & Steel Service Centre Ltd. for the use intended. |
||||||||||||
| Duggan Profiles & Steel Service Centre Ltd. Dublin Road, Kilkenny - Ireland Tel.: +353-56-7722485 - Fax: +353-56-7763411 E-mail: salesdp@steel.ie © Copyright Duggan Steel Group Ltd. 2008 webmaster@steel.ie Last update: 29 August, 2008 |
   |