1000/32 Prodeck Physical Properties

\| Brochures \| Recruitment \| Disclaimer \|

DUGGAN PROFILES & STEEL SERVICE CENTRE Ltd.


1000/32 Prodeck Physical Properties

32mm Deep Profile 1000mm Cover Width (Material Spec.: Fe E 280 G)				Reduced Properties
				Small Flange in Comp.		Large Flange in Comp.
Nominal Thickness mm	Design Thickness mm	Nominal Area Cm2	Weight Kg/m2	Moment of resistance (kN m/m)	Ixx (Cm4/m)	Moment of resistance (kN m/m)	Ixx (Cm4/m)

0.70	0.66	8.073	6.324	1.055	13.142	0.935	9.270
0.90	0.86	10.503	8.240	1.389	17.152	1.377	13.109
1.20	1.16	14.131	11.115	1.888	23.127	2.187	19.539

Physical Properties The calculation of the physical properties of the steel facing sheets have been based on an effective width concept as used in BS 5950: 1987 “Code of practice for design of cold formed sections”. Reference has also been made to the recommendations of the European Convention for Constructional Steelworks ECCS-TC7 “The design of Profiled sheeting” and also the well established procedures of the Metal Roof Deck Association.

800/66 Prodeck Physical Properties 800/66 Roof Decking Load Table 1000/32 Roof Decking Load Table Built up roof section for 800/66 Prodeck Built up roof section for 1000/32 Prodeck


Duggan Profiles & Steel Service Centre Ltd. Dublin Road, Kilkenny - Ireland Tel.: +353-56-7722485 - Fax: +353-56-7763411 E-mail: salesdp@steel.ie © Copyright Duggan Steel Group Ltd. 2008 webmaster@steel.ie Last update: 23 July, 2008