DUGGAN PROFILES &
STEEL SERVICE CENTRE Ltd.
| | Brochures | Recruitment | Disclaimer | | |
|
|
DUGGAN PROFILES & |
|
 |
||||||||||||
| 1000/32 Prodeck Roof Decking Load Table | ||||||||||||
 |
||||||||||||
| 32mm Deep Profile 1000mm Cover Width (Material Spec.: Fe E 280 G) |
Applied Load in kN/m2 | |||||||||||
| Span in Metres | ||||||||||||
| Section Type | Thick mm | Load Type | 1.2 | 1.4 | 1.6 | 1.8 | 2.0 | 2.2 | 2.4 | 2.6 | 2.8 | 3.0 |
| Single | 0.70 | Dead + Super | 3.31 | 2.04 | 1.33 | 0.89 | 0.61 | |||||
| Wind Suction | 6.06 | 3.86 | 2.63 | 1.89 | 1.42 | |||||||
| 0.90 | Dead + Super | 4.68 | 2.90 | 1.89 | 1.27 | 0.87 | 0.60 | |||||
| Wind Suction | 7.91 | 5.04 | 3.43 | 2.46 | 1.85 | 1.45 | ||||||
| 1.20 | Dead + Super | 4.33 | 2.83 | 1.92 | 1.32 | 0.92 | 0.63 | |||||
| Wind Suction | 6.79 | 4.62 | 3.32 | 2.49 | 1.95 | 1.58 | ||||||
| Double | 0.70 | Dead + Super | 4.22 | 2.98 | 2.05 | 1.45 | 1.05 | 0.76 | 0.56 | |||
| Wind Suction | 4.45 | 3.44 | 2.75 | 2.26 | 1.90 | 1.63 | 1.43 | |||||
| 0.90 | Dead + Super | 4.23 | 2.92 | 2.07 | 1.50 | 1.10 | 0.81 | 0.59 | ||||
| Wind Suction | 5.71 | 4.56 | 3.73 | 2.92 | 2.31 | 1.87 | 1.56 | |||||
| 1.20 | Dead + Super | 4.37 | 3.11 | 2.26 | 1.66 | 1.23 | 0.91 | 0.66 | ||||
| Wind Suction | 6.19 | 5.07 | 3.94 | 3.11 | 2.52 | 2.10 | 1.78 | |||||
| Multiple | 0.70 | Dead + Super | 4.51 | 2.98 | 2.05 | 1.45 | 1.05 | 0.76 | 0.56 | |||
| Wind Suction | 5.54 | 4.27 | 3.41 | 2.79 | 2.24 | 1.77 | 1.43 | |||||
| 0.90 | Dead + Super | 4.23 | 2.92 | 2.07 | 1.50 | 1.10 | 0.81 | 0.59 | ||||
| Wind Suction | 6.28 | 5.00 | 3.81 | 2.92 | 2.31 | 1.87 | 1.56 | |||||
| 1.20 | Dead + Super | 4.37 | 3.11 | 2.26 | 1.66 | 1.23 | 0.91 | 0.66 | ||||
| Wind Suction | 6.95 | 5.14 | 3.94 | 3.11 | 2.52 | 2.10 | 1.78 | |||||
| Deflection: Dead + Super = L/250 Deflection: Wind Suction Loads + L/200 Note: All intermediate values within the limits of the table may be obtained by linear interpolation. |
||||||||||||
Figures and Comments given here are given for guidance purposes only. While care has been taken to ensure accuracy Duggan Profiles & Steel Service Centre Ltd. and its related companies do not accept liability for errors / or omissions. Customers should satisfy themselves of the suitability of the products supplied or manufactured by Duggan Profiles & Steel Service Centre Ltd. for the use intended. |
||||||||||||
| Duggan Profiles & Steel Service Centre Ltd. Dublin Road, Kilkenny - Ireland Tel.: +353-56-7722485 - Fax: +353-56-7763411 E-mail: salesdp@steel.ie © Copyright Duggan Steel Group Ltd. 2008 webmaster@steel.ie Last update: 23 July, 2008 |
   |