Proliner 1000/20 Physical Properties

\| Brochures \| Recruitment \| Disclaimer \|

DUGGAN PROFILES & STEEL SERVICE CENTRE Ltd.

		Physical Properties Proliner 1000/20

Full Properties					Reduced Properties
Full Properties					Small Flange in Comp.		Large Flange in Comp.
Thickness	Weight	Area	Ixx	Zxx	Ixx	Zxx	Ixx	Zxx
mm	Kg/m2	Cm2	Cm4	Cm3	Cm4	Cm3	Cm4	Cm3
0.40	3.609	4.600	2.673	2.010	2.192	1.353	1.580	1.294
0.70	6.315	8.050	4.707	3.589	4.629	3.196	3.287	2.890
Ixx Cm4 = Moment of Inertia Zxx Cm3 = Section Modulus

Physical Properties The calculation of the physical properties of the steel facing sheets have been based on an effective width concept as used in BS 5950: 1987 “Code of practice for design of cold formed sections”. Reference has also been made to the recommendations of the European Convention for Constructional Steelwork ECCS-TC7 “The design of Profiled sheeting” and also the well established procedures of the Metal Roof Deck Association.
Proliner 1000/32: Physical Properties Proliner 1000/32: Roofing Cladding Normal Profile Load Table Proliner 1000/32: Side Wall Cladding Profile Load Table Proliner 1000/20: Roofing Cladding Normal Profile Load Table Proliner 1000/20: Side Wall Cladding Profile Load Table Typical Vertical Wall Detail


Duggan Profiles & Steel Service Centre Ltd. Dublin Road, Kilkenny - Ireland Tel.: +353-56-7722485 - Fax: +353-56-7763411 E-mail: salesdp@steel.ie © Copyright Duggan Steel Group Ltd. 2008 webmaster@steel.ie Last update: 29 August, 2008