| Brochures | Recruitment | Disclaimer |
Duggan Steel Group
Website Address

DUGGAN PROFILES &
STEEL SERVICE CENTRE Ltd.
Agripurlin
Allowable Loads for Single Span System
  Applied Load in kN/m2 Deflection = L/180
Centres of Purlins in metres
Span (m) Section Type Load Type Load N 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.00
 
4.8 125/12 Dead + Super 3236 0.90 0.75 0.64 0.56 0.50 0.45 0.41 0.37 0.34
Wind Uplift 2829 0.79 0.65 0.56 0.49 0.44 0.39 0.36 0.33 0.29
125/15 Dead + Super 4160 1.16 0.96 0.83 0.72 0.64 0.58 0.53 0.48 0.43
Wind Uplift 3629 1.01 0.84 0.72 0.63 0.56 0.50 0.46 0.42 0.38
 
4.8 150/12 Dead + Super 4998 1.39 1.16 0.99 0.87 0.77 0.69 0.63 0.58 0.52
Wind Uplift 4257 1.18 0.99 0.84 0.74 0.66 0.59 0.54 0.49 0.44
150/15 Dead + Super 6418 1.78 1.49 1.27 1.11 0.99 0.89 0.81 0.74 0.67
Wind Uplift 5459 1.52 1.26 1.08 0.95 0.84 0.76 0.69 0.63 0.57
 
4.8 175/12 Dead + Super 7210 2.00 1.67 1.43 1.25 1.11 1.00 0.91 0.83 0.75
Wind Uplift 6047 1.68 1.40 1.20 1.05 0.93 0.84 0.76 0.70 0.63
175/15 Dead + Super 9252 2.57 2.14 1.84 1.61 1.43 1.28 1.17 1.07 0.98
Wind Uplift 7751 2.15 1.79 1.54 1.35 1.20 1.08 0.98 0.90 0.81
 
4.8 200/15 Dead + Super 12706 3.53 2.94 2.52 2.21 1.96 1.76 1.60 1.47 1.32
Wind Uplift 10538 2.93 2.44 2.09 1.83 1.63 1.46 1.33 1.22 1.10
 
Note: Intermediate values within the limits of the table may be obtained by linear interpolation
x
  Applied Load in kN/m2 Deflection = L/180
Centres of Purlins in metres
Span (m) Section Type Load Type Load N 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.00
 
6.1 125/12 Dead + Super 1917 0.42 0.35 0.30 0.26 0.23 0.21 0.19 0.17 0.16
Wind Uplift 1839 0.40 0.33 0.29 0.25 0.22 0.20 0.18 0.17 0.15
125/15 Dead + Super 2467 0.54 0.45 0.39 0.34 0.30 0.27 0.25 0.22 0.20
Wind Uplift 2356 0.51 0.43 0.37 0.32 0.29 0.26 0.23 0.21 0.19
 
6.1 150/12 Dead + Super 3001 0.66 0.55 0.47 0.41 0.36 0.33 0.30 0.27 0.25
Wind Uplift 2730 0.60 0.50 0.43 0.37 0.33 0.30 0.27 0.25 0.22
150/15 Dead + Super 3856 0.84 0.70 0.60 0.53 0.47 0.42 0.38 0.35 0.32
Wind Uplift 3498 0.76 0.64 0.55 0.48 0.42 0.38 0.35 0.32 0.29
 
6.1 175/12 Dead + Super 4364 0.95 0.79 0.68 0.60 0.53 0.48 0.43 0.40 0.36
Wind Uplift 3845 0.84 0.70 0.60 0.53 0.47 0.42 0.38 0.35 0.32
175/15 Dead + Super 5802 1.22 1.02 0.87 0.77 0.68 0.61 0.56 0.51 0.46
Wind Uplift 4926 1.08 0.90 0.77 0.67 0.60 0.54 0.49 0.45 0.40
 
6.1 200/15 Dead + Super 7732 1.69 1.41 1.21 1.06 0.94 0.85 0.77 0.70 0.63
Wind Uplift 6660 1.46 1.21 1.04 0.91 0.81 0.73 0.66 0.61 0.55
 
Note: Intermediate values within the limits of the table may be obtained by linear interpolation

Go to Physical Properties
Duggan Profiles & Steel Service Centre Ltd.
Dublin Road,
Kilkenny - Ireland
Tel.: +353-56-7722485 - Fax: +353-56-7763411
E-mail: salesdp@steel.ie

© Copyright Duggan Steel Group Ltd. 2008
webmaster@steel.ie
Last update: 29 August, 2008		 Copyright Duggan Steel Group 2008

CIF ISO9000